Put words in double quotes to match phrase

Acquire™ is a trademark of Ambrit Ltd

Acquire must be in Config mode to perform these steps.

Acquire will automatically generate all the default screens for the metering station.

Additional screens can be added as follows:

1. Select ‘Screens’ from the ‘Acquire’ menu

2014-01-15 11.45.30 Screenshot

2. Select ‘Screens Setup’ from the ‘File’ menu

The Screen Setup screen will be displayed:

2014-01-15 11.47.47 Screenshot

3. Click a stream to highlight it in the Stream list

4. Click in the Menu list

The ‘Add Menu’ and ‘Delete Menu’ buttons will be displayed:

2014-01-15 11.49.23 Screenshot

5. Click the ‘Add Menu’ button

2014-01-15 11.51.42 Screenshot

5. Enter the ‘Menu Name’

6. Click the ‘OK’ button

The new menu will be added to the Menu list:

2014-01-15 11.53.24 Screenshot

Every menu must have at least one screen so a screen is created by default.

Menus can be rearranged by dragging and dropping them into a different order.

7. Click a menu to highlight it in the Menu list

8. Click the ‘Add Screen’ button

The Edit Screen window will be displayed:

2014-01-15 11.55.23 Screenshot

9. Select a ‘Screen Type’

There are four types of screen available:

2 Data Columns with Chart This is the most common screen layout in Acquire. It displays a chart and up to 16 fields.
4 Data Columns This layout does not include a chart but can display up to 32 fields.
Favourites This screen shows up to 36 fields and 36 modes. This is ideal for Gas Composition layouts.
Calculations This screen is specifically designed to show calculation inputs and outputs. It will show up to 12 inputs (and 12 input modes) and 12 outputs (and 12 output modes). Edit the column titles by clicking on them.

8. Enter the ‘Screen Name’

9. Click the ‘OK’ button

The new screen will be added to the Screen list:

2014-01-15 12.01.37 Screenshot

Screens can be rearranged by dragging and dropping them into a different order.

Screens can be reallocated to a different menu by dragging and dropping them onto a different menu.

10. Click the ‘OK’ button

The new screen will be added to the menu in the interface.

2014-01-15 12.02.49 Screenshot

For more information on setting up screens see the ‘Adding a Field to a Screen’ section.