Acquire™ is a trademark of Ambrit Ltd
© 2022 Ambrit Ltd
This is an optional feature and will only be available if it has been licensed in the key file.
Acquire must be in Config mode to perform these steps.
Acquire can manage how batches are recalculated in the flow computer. The batch results are resubmitted to the flow computer and the flow computer then performs the recalculation.
Note: Omni flow computers can only recalculate the last 4 batches.
Follow these instructions to open the Batch Settings screen.
|Batch Density||Enter the units and calculation method that should be used when entering the batch density when recalculating the batch.|
|Batch BS&W||Enter the units and calculation method that should be used when entering the batch BS&W when recalculating the batch.|
|Batch Gravity||Enter the units and calculation method that should be used when entering the batch gravity when recalculating the batch.|
|Recalculate Batch||Select the method that should be used to recalculate the batch. At the moment the only batch recalculation method is by using Acquire.|