Put words in double quotes to match phrase

Acquire™ is a trademark of Ambrit Ltd

Acquire must be in Config mode to perform these steps.

Acquire allows up to 9 P&IDs to be added per station.

1. Select ‘P&ID’ from the ‘Acquire’ menu

The default P&ID will be displayed:

2014-01-13 17.30.33 Screenshot

2. Select ‘Setup P&IDs’ from the ‘File’ menu

The Setup P&IDs window will be displayed:

2014-02-03 15.55.57 Screenshot

3. Click on an unused P&ID View in the grid

The border will be highlighted in blue:

2014-02-03 15.56.12 Screenshot

4. Click the ‘Add’ button

The default title “New P&ID” will be added:

2014-02-03 15.56.25 Screenshot

5. Click on “New P&ID” and rename it

2014-02-03 16.02.27 Screenshot

6. Click the ‘OK’ button

The Setup P&IDs window will close and the default P&ID will be displayed again:

2014-01-13 17.30.33 Screenshot

7. Click ‘P&ID’ in the Navigation Bar

A popup will display the available P&ID Views:

2014-02-03 16.03.29 Screenshot

8. Select the new P&ID View

The new P&ID View will be displayed:

2014-02-03 16.03.40 Screenshot

9. Set up the P&ID

Add pipesdevices, tagsfields and buttons to configure the P&ID as required.

Tip: Two P&IDs can be linked together. See the ‘Linking Flow from P&ID Views’ section.