Put words in double quotes to match phrase

Acquire™ is a trademark of Ambrit Ltd

Setting Up Redundant Servers

This is an optional feature and will only be available if it has been licensed in the key file.

1. Ensure both Server 1 and Server 2 are on the network

Server Redundancy

Both computers should be set up on the network and allocated an IP address that matches the IP address supplied to Ambrit.

2. Install Acquire on Server 1

Follow these instructions to install Acquire.

3. Install the Server 1 key on Server 1

4. Install Acquire on Server 2

Follow these instructions to install Acquire.

5. Install the Server 2 key on Server 2

6. Launch Acquire on Server 1

The server will start up normally. Set up the data file by adding a Station and configure the system accordingly.

7. Launch Acquire on Server 2

Copy the data file from Server 1 to the “Database” folder on Server 2 before starting up Acquire on Server 2.

Once the data file has been copied from Server 1 to Server 2, the following dialog window will appear.  Click ‘Continue’ to start using the copied data file.