Acquire™ is a trademark of Ambrit Ltd
© 2019 Ambrit Ltd
Acquire must be in Config mode to perform these steps.
Devices that are added to the P&ID as part of Acquire’s initial setup will be given a default Tag automatically but they will not be displayed on the P&ID until the Tag name is defined.
Devices that are added to the P&ID manually will need to have a Tag added manually.
Follow these instructions to add or rename Tags:
All the text areas on the P&ID will be displayed:
All devices created by default will have a Tag associated with them. If the device already has a Tag, skip to step 7. If the device does not have a Tag then follow steps 3 to 6 to add it manually:
Acquire will automatically associate the Tag with the closest device and the Text Box Properties window will be displayed so that the Tag’s text styling can be set.
If an incorrect device (or no device) has been selected, choose the correct device from the list:
The Device Properties window will be displayed:
The tag name will be displayed under the icon and at the top of the sidebar: