Process Data

• Viewing Real Time Data

  ( Process Data )

  1. Navigate to the station See the ‘Viewing a Station’ section for more details. 2. Click the ‘Process Data’ tab in the Navigation Bar 3. Click the ‘Live Data’ button Once the screen is opened, Profile will automatically start communicating with the associated RTU and … Continue reading →

• Changing Set Points

  ( Process Data )

  1. Navigate to the station See the ‘Viewing a Station’ section for more details. 2. Click the ‘Process Data’ tab in the Navigation Bar 3. Click the ‘Live Data’ button Fields that can be edited have an ‘Edit’ button next to them. Real time values cannot … Continue reading →

• Viewing Historical Data

  ( Process Data )

  Profile takes readings from the RTU at a regular interval and records the readings in its own internal database. Profile keeps all stored data indefinitely. The historical data interval is set by the system administrator and can be anywhere between … Continue reading →

• Viewing Latest Data

  ( Process Data )

  By default Profile shows real time data in the process data screens and will continually update these screens with the latest values from the RTU every few seconds. Although this gives the most up to date information there may instances … Continue reading →

• Adding a Screen

  ( Process Data )

  Screens are defined for each stream type, e.g. station, meter run or prover etc. Profile will automatically use them for multiple instances of the same stream types. For example, if you create a screen for a meter run stream in the configuration … Continue reading →

• Viewing Active Alarms

  ( Process Data )

  1. Navigate to the station See the ‘Viewing a Station’ section for more details. 2. Click the ‘Alarms’ tab in the Navigation Bar This will show a list of all active alarms on the station. 3. Click the ‘Export’ button This will export all … Continue reading →