Put words in double quotes to match phrase

Profile™ is a trademark of Ambrit Ltd

Manually Allocating Streams

Some RTUs have the ability to handle multiple meter runs. Profile, will by default, attempt to map the meter runs in the RTU to the meter runs used in Profile using a straight forward mapping, e.g. meter run 1 in the RTU = meter run 1 in Profile, etc. If your configuration is more complicated than this you will need to manually allocate.

1. Add the RTU but do not click the ‘Automatically Allocate Streams’ checkbox

See the ‘Adding an RTU‘ section for more details on how to add an RTU.

Screen shot 2010-03-27 at 10.12.15

2. Click the ‘Save’ button

Screen shot 2010-03-27 at 10.14.50

3. Use the menus to allocate the streams in the RTU to the streams in the station

4. Click the ‘Save’ button