Put words in double quotes to match phrase

Profile™ is a trademark of Ambrit Ltd

Setting up FLOWCAL Station Values

N.B. This must be performed on the server.

1. Go to the station

Screen shot 2010-03-25 at 17.12.52

2. Click the ‘Station’ tab in the Navigation Bar

droppedImage-4

3. Click the ‘Edit’ button next to the stream that you want to edit

droppedImage-5

Any field that was marked as “From Station” in the FLOWCAL ‘Data Source’ will be listed here.

4. Enter the field values

Note: A folder for each meter is created in the main FLOWCAL folder (see FLOWCAL export preferences screen). This folder will be named using the value from the ‘Host Tag For This Meter’ field. If the ‘Host Tag For This Meter’ field does not have a value the RTU name will be used instead.

5. Click the ‘OK’ button

6. Repeat steps 3 to 5 for each meter run

7. Click the ‘Save’ button to save the station data