Put words in double quotes to match phrase

Profile™ is a trademark of Ambrit Ltd

Setting Up the Overview

N.B. This must be performed on the server.

1. Open the configuration


2. Click on the ‘Overview’ configuration settings panel

Screen shot 2010-03-31 at 13.08.32

The Overview can include up to 5 fields from all configurations on the system.

3. Click on the ‘Define Field’ column heading of column 1

Screen shot 2010-03-31 at 13.11.14

4. Enter the title for the column

5. Click the ‘OK’ button

Screen shot 2010-03-31 at 13.13.31

6. Click on the box in the row underneath the column heading

Screen shot 2010-03-31 at 13.15.08

7. Enter the details as follows:

Field This field contains the name of the RTU field whose value will be displayed on the report.Tip: Entering a portion of the field name and then clicking the ‘Go’ button will search the RTU fields for matches. Entering the Modbus address will also go straight to that field.
Decimal Places This popup menu defines the number of decimal places that the value will be displayed with.

8. Highlight the field in the list

9. Click the ‘Select’ button

Alternatively double click on the field.

10. Repeat steps 3 to 9 for columns 2, 3, 4 and 5 to add more fields to the overview

11. Click the ‘OK’ button

This return to the main configuration page.

12. Click the ‘Apply’ button.

This will make the configuration changes active.

Tip: This method allows the overview to be setup for a single configuration only. Alternatively, select ‘Overview…’ from the ‘Config’ menu to set up the overview for all configurations.