Put words in double quotes to match phrase

Profile™ is a trademark of Ambrit Ltd

Setting up Configuration Modbus Server Map

N.B. This must be performed on the server.

Each configuration has its own Modbus map. This map will automatically be extrapolated for each RTU on the system See here for more information.

1. Open the Configuration

2014-07-08 13.25.22 Screenshot

2. Click on the ‘Modbus Server’ configuration settings panel

Note: The Modbus Server configuration setting panel is only available if it has been enabled in the server licence.

2014-07-08 13.28.14 Screenshot

3. Click the ‘Add Field’ button

This will open a window that contains all the fields in the configuration.

2014-07-08 13.30.17 Screenshot

4. Select the required field from the list

5. Click the ‘Select’ button

The field will be added to the list.

2014-07-08 13.32.49 Screenshot

6. Repeat steps 3 to 5 for each field

Tip: The fields can be repositioned by dragging and dropping them in the list.

7. Click the ‘OK’ button

2014-07-08 13.25.22 Screenshot

8. Click the ‘Apply’ button

The Modbus server map changes will be applied to every RTU using the configuration.

Note: The entire Modbus map can be seen in Modbus Server screen.