Put words in double quotes to match phrase

Profile™ is a trademark of Ambrit Ltd

© 2025 Ambrit Ltd

Server Settings

  • Audit Trail

    ( Server Settings )

    The number of audit trail items collected per RTU in a 24 hour period can be restricted to prevent the server from being overwhelmed. 1. Click the cog icon in the Location Bar and select ‘Settings’ on the menu 1 2. Click … Continue reading →

  • Email Settings

    ( Server Settings )

    A mail server and email address must be specified in order for Profile to send reports by email. 1. Click the cog icon in the Location Bar and select ‘Settings’ on the menu 1 2. Click ‘Email’ in the left hand column 2 The … Continue reading →

  • Meter Types

    ( Server Settings )

    The Meter Types screen defines which meters are active in Profile and helps to standardise their meter settings in Profile and the flow computers. The meter types screen is preloaded with a default meter list but users can add new meter types and deactivate unused meter … Continue reading →

  • Prover Settings

    ( Server Settings )

    1. Click the cog icon in the Location Bar and select ‘Settings’ on the menu 1 2. Click ‘Prover’ in the left hand column 2 The Prover settings screen is displayed: 3. Select the prover functionality that is required on the system 3 N.B. Some options will only … Continue reading →

  • SSL Certificates

    ( Server Settings )

    If the SSL certificates are stored in the PFX format and password-protected then the password for the web server must be specified. 1. Click the cog icon in the Location Bar and select ‘Settings’ on the menu 1 2. Click ‘SSL Certificates’ in … Continue reading →

  • Status Notifications

    ( Server Settings )

    VIA/RTU daily status reports can be emailed to subscribers automatically at midnight (server time). OPC notifications will be triggered immediately if the OPC data has not updated within the time period specified. 1. Click the cog icon in the Location Bar … Continue reading →

  • Active Connections

    ( Server Settings )

    The Enterprise server must grant all connected SCADA servers access before they can upload any data. The SCADA servers will be displayed on the Active Connections settings screen and can be allowed or suspended as required. N.B. Suspending a server … Continue reading →