Put words in double quotes to match phrase

Profile™ is a trademark of Ambrit Ltd

1. Click on the Area where the Station is located in the Worldwide Menu

Screen shot 2010-03-25 at 17.12.52

2. Click the ‘Station’ tab in the Navigation Bar

Screen shot 2010-03-25 at 17.14.07

3. Click the ‘Add’ button at the bottom of the screen

Screen shot 2010-03-25 at 17.15.13

4. Enter the ‘Station Name’

5. Leave the ‘Station Type’ as “Profile”

6. Enter the ‘Number of Streams’

If the station is handled by a single stream RTU then this will generally be one.

Flow Computer Note: If the RTU is a multi-stream flow computer then extra options will be available for station and prover. If the flow computer has a station and prover built into it then tick these checkboxes.

7. Click the ‘Save’ button

Profile will ask whether the RTUs should be setup.

8. Click the ‘OK’ button to add the RTU

Screen shot 2010-03-25 at 17.19.31

See the ‘Adding an RTU‘ section for more details on how to add an RTU.