N.B. This feature will only be available if a Calibrate™ licence has been purchased and is activated on the Station Settings screen.
If a station has been set to calibrate by meter run (see the ‘Setting the Calibration Mode’ section for more details), multiple tag based calibrations can be combined into a single calibration event based around calibrating the meter run in its entirety in a single session.
N.B. Calibrations can only be added in station mode.
1. Navigate to the station
See the ‘Viewing a Station’ section for more details.
2. Click the ‘Calibrations’ tab in the Navigation Bar 1
The Calibrations list will be displayed:
3. Click the ‘Add’ button 2
The Add Calibration window will be displayed:
4. Select a Meter Run and Tag 3
5. Click the ‘Add’ button 4
The selected calibration setup will be displayed:
