Put words in double quotes to match phrase

Profile™ is a trademark of Ambrit Ltd

Viewing a Station

1. Go to the Worldwide Mode

Screen shot 2010-03-20 at 08.14.01

2. Navigate to the area where the Station is located using the Worldwide Menu or the maps

See the ‘Navigating Using the Worldwide Menu‘ or ‘Navigating Using the Map‘ sections for more details.

Stations are presented slightly differently depending on whether the server is running in Large System Mode or Small System Mode.  See the ‘Setting Profile Preferences‘ section for more details.

Small System Mode
In Small System Mode (where there are less than 200 stations) the stations are included within the Worldwide Menu.

droppedImage-19

Highlighting a station in the Worldwide Menu filters the global stations, overview, alarms and RTU lists to only show information for that station.

3a. To enter Station Mode, click on the arrow to the right of the station name in the Worldwide Menu or double click on the required station in the Stations List

This shows the Process Data screen by default but Profile will remember the last screen that was displayed and will automatically take the user back to that screen.

Large System Mode
In Large System Mode (where there are more than 200 stations) the stations will not be included in the Worldwide Menu to ensure that the menu is fast to load. The deepest element in the Worldwide Menu is the area that contains the stations.

droppedImage-18

In Large System Mode the stations are only listed in the Stations List.

3b. To enter Station Mode, double click on the required station in the Stations List

This shows the Process Data screen by default but Profile will remember the last screen that was displayed and will automatically take the user back to that screen.

Screen shot 2010-03-26 at 10.18.17

4. To exit Station Mode and return to Worldwide Mode, click the arrow or anywhere on the path in the Location Bar