1. Click the cog icon in the Location Bar and select ‘Configurations’ on the menu
The Configurations List is displayed:
2. Click the ‘Add Config’ button
The configuration editor is displayed:
The left hand sidebar 2 shows the list of available sections.
The right hand panel 3 shows the set of fields associated with the selected section. A set of default fields is provided for each section but these can be edited as required (see below).
3. Enter a name for the configuration 1
4. Select a section in the sidebar 2
5. Configure the fields as required 3
N.B. For mandatory fields, the Field Name will not be editable.
To add a field, click the ‘Add Field’ button. If there is not a row selected, the new field will be added at the top of the list. If a row is selected, the new row will be added immediately above the selected row.
To delete a field, select its row in the list and click the ‘Delete Field’ button.
To reorder fields, drag and drop them to a new position in the list.
6. Repeat steps 4 and 5 for all of the applicable sections in the sidebar 2
6. Click the ‘Save’ button to save the changes and return to the Configurations list 6
N.B. Click the ‘Apply’ button to save the changes without returning to the Configurations list.